Table of Contents
Advertisement
Installation of the Option Board
6.
7.
8.
14
Figure 2-6:
HART Option Board Connectors/Switches/LEDs
Make any desired changes to the switch settings on the Option board before
installation. Use the Wiring Diagram Card C-15470 provided as a reference.
Install the Option board on the CPU board making sure that the connector on the
bottom of the Option board mates to the connector on top of the CPU board.
Figure 2-7:
Mount Option board
Secure the Option board to the CPU board with the three Kep screws.
Daniel Ultrasonic Series 100 Option Board Field
Advertisement
Table of Contents
