Table of Contents
Advertisement
3.
4.
5.
Installation procedure
Push the locking mechanism on both card guides to the unlocked position as shown.
Figure 2-2:
Unlock CPU board
Slide the CPU board out of the enclosure. Use the 1/8" flat-head or flat-blade
screwdriver to unscrew the two Acquisition board cable screws. Disconnect the
cable and remove the CPU board from the enclosure.
Figure 2-3:
Remove CPU board
Use a Phillips-head screwdriver to remove the washers and screws from the three
standoffs attached to the Option board.
Installation of the Option Board
11
Advertisement
Table of Contents
