Table of Contents
Advertisement
Installation of the Option Board
2.
10
Figure 2-1:
Open electronics enclosure
Daniel Mark III Gas Ultrasonic Meters
Series 100 Option Board:
Series 100 Plus HART Option Board:
Daniel 3800 Liquid Ultrasonic Meters
Series 100 Option Board:
Series 100 Plus HART Option Board:
Even if your meter has a supported firmware version, it is recommended to check
the Daniel CUI CD included in this kit to see if a later version of firmware is included.
The firmware for your meter can be found under one of the following directories on
the CD.
•
Ultrasonic Gas\Daniel Mark III Firmware
•
Ultrasonic Liquid\Daniel 3800 Firmware
Use the Program Download utility under the Tools pull down menu in Daniel CUI to
upgrade the firmware in the meter if necessary. Clicking F1 with the Program
Download utility open will display a complete help topic on how to perform the
download.
Remove power to the unit and remove both end caps from the upper electronics.
Requires version 1.30 firmware or later.
Requires version 1.60 firmware or later.
Requires version 1.00 firmware or later.
Requires version 1.60 firmware or later.
Daniel Ultrasonic Series 100 Option Board Field
Advertisement
Table of Contents
