Table of Contents
Advertisement
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
7. Partially loosen the set screws in the yoke of the
motor assembly (Fig. 7).
8. Remove the downrod clip and downrod pin from
the downrod (Fig. 8).
Downrod Pin
Downrod Clip
9. Feed the wires from the motor assembly through
the yoke cover, canopy, and out the top of the
downrod (Fig. 9).
Fig. 7
Fig. 8
Fig. 9
7
Set Screw
Downrod
Clip
Downrod
Pin
Downrod
Canopy
Yoke
Cover
Advertisement
Table of Contents
