Honeywell SALERMO Manual page 9

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
13. Install the ball end of the downrod into the
mounting bracket opening. Align the slot in the ball
with the tab in the mounting bracket. If installed
correctly, the downrod should not rotate in the
mounting bracket (Fig. 13).
!
WARNING
Failure to align the slot in the downrod with the tab
on the mounting bracket could cause the fan to fall,
which could result in serious injury or death.
14. Insert the receiver into the mounting bracket with
the flat side facing the ceiling (Fig.14).
a
!
Fig. 13
Mounting
Bracket
Fig. 14
9
Tab
Slot
Receiver
Downrod
Ball