Wiring - Honeywell SALERMO Manual

!
CAUTION
Be sure outlet box is properly grounded or that a
ground (green or bare) wire is present.
!
WARNING
If house wires are different colors than referred to in
the following steps, consult a professional electrician
to determine wiring. Incorrect wire connection can
damage the fan and could cause fire or injury.
!
WARNING
Ensure black and white wire connections are on
opposite sides of the outlet box.
18. Connect supply and fan wires according to the
diagram (Fig. 18) and these steps:
• Connect the Green wires from the fan and the
mounting bracket to the Bare/Green (ground)
supply wire.
• Connect the Blue wire with white label from the
receiver to the Blue fan wire.
• Connect the Black wire with white label from the
receiver to the Black fan wire.
• Connect the Red wire with red label from the
receiver to the Black (hot/power) supply wire.
• Connect the White wire with red label from the
receiver to the White (neutral) supply wire.
• Connect the White wire with white label from the
receiver to the White fan wire.
Secure all wiring connections with wire connectors
and push all connected wires back into the outlet
box.
Note: The black fan wire is power for fan. The blue
fan wire is power for the light. The white wire from
the fan is common/neutral. The green wires from the
fan and mounting bracket are ground wires.
!
a
!
a
!

WIRING

Fig. 18
11
Black (hot/power)
White (neutral)
Bare/Green
(ground)
Wire Connector