ELECTRICAL SYSTEM ASSEMBLY
1. Extend the electric cable (5) in Asm-RK-0328
along the machine drawbar. Screw connector
(3) into the valve (5) with the bolt (4) in Asm-
RK-0327 passing through the hydraulic hoses
as shown. Fasten the cable (1) with the bands
(2) along the hydraulic hoses of the machine
drawbar. Place the control box (1) in Asm-RK-
0328 in the tractor cab using the bracket (3).
Tighten the knobs (2) after having placed the
control box. Connect the multi-pin plug (7) to
the tractor plug.
NOTE: When the machine is detached from the
tractor, the connector (4) of cable (5) can be
disconnected, leaving the control box permanently
in the tractor cab.
XLRRX 06/18
© 2018 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-19