1. Manuals
  2. Brands
  3. Alamo Manuals
  4. Farm Equipment
  5. BUSH HOG XLRRX Series
  6. Operator's manual

Alamo BUSH HOG XLRRX Series Operator's Manual

V-rake
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Published 06/18
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover
®
BUSH HOG
2501 Griffin Ave.
Selma, AL 36703
334-874-2700
www.bushhog.com
OPERATOR'S MANUAL
© 2018 Alamo Group Inc.
XLRRX
V-Rake
Part No. 50080671
$0.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BUSH HOG XLRRX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alamo BUSH HOG XLRRX Series

Summary of Contents for Alamo BUSH HOG XLRRX Series

  • Page 1 READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. C01- Cover ® BUSH HOG 2501 Griffin Ave. Selma, AL 36703 334-874-2700 www.bushhog.com $0.00 © 2018 Alamo Group Inc.
  • Page 2 To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY SECTION ..................1-1 General Safety Instructions and Practices ......................1-2 Operator Safety Instructions and Practices ......................1-3 Equipment Operation Safety Instructions and Practices..................1-5 Connecting or Disconnecting Implement Safety Instructions and Practices ............1-7 Transporting Safety Instructions and Practices ....................1-8 Maintenance and Service Safety Instructions and Practices ................
  • Page 4 Setting Implement into Work Position ....................... 4-20 Adjustment in work position ..........................4-21 Operating on one side only ..........................4-22 Locking the Rake Wheel in the raised position ....................4-23 Foreign Debris Hazards ............................ 4-23 PTO RPM and Ground Speed .......................... 4-23 Shutting Down the Implement ...........................

  • Page 5: Safety Section

    SAFETY SECTION Safety Section 1-1 © 2018 Alamo Group Inc.

  • Page 6: General Safety Instructions And Practices

    Safety Messages. Always use good common sense to avoid hazards. (SG-2) Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3) XLRRX 06/18 Safety Section 1-2 © 2018 Alamo Group Inc.

  • Page 7: Operator Safety Instructions And Practices

    (SG-I7) Always read carefully and comply fully with the manufacturer’s instructions when handling oil, solvents, cleansers, and any other chemical agent. (SG-22) XLRRX 06/18 Safety Section 1-3 © 2018 Alamo Group Inc.
  • Page 8 Tractor control failure occur while operating, immediately shut down the Tractor and perform repairs before resuming operation. Serious injury and possible death could occur from not maintaining this Implement and Tractor in good operating condition. (SG-36) XLRRX 06/18 Safety Section 1-4 © 2018 Alamo Group Inc.

  • Page 9: Equipment Operation Safety Instructions And Practices

    (ROPS). Always wear seat belts. Serious injury or even death could result from falling off the tractor--particularly during a turnover when the operator could be pinned under the ROPS. (SG-7) XLRRX 06/18 Safety Section 1-5 © 2018 Alamo Group Inc.
  • Page 10 REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure. (SG-15) XLRRX 06/18 Safety Section 1-6 © 2018 Alamo Group Inc.

  • Page 11: Connecting Or Disconnecting Implement Safety Instructions And Practices

    Use the Tongue Jack for lifting the Implement only. Overloading the Tongue Jack can cause failure with possible serious bodily injury or even death. (STI-04) XLRRX 06/18 Safety Section 1-7 © 2018 Alamo Group Inc.

  • Page 12: Transporting Safety Instructions And Practices

    Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the Tractor flashing warning lights and follow all local traffic regulations. (SG-6) XLRRX 06/18 Safety Section 1-8 © 2018 Alamo Group Inc.
  • Page 13 Implement behind a truck or other type of vehicle. Never tow the Implement and another Implement connected in tandem. Never tow the Implement at speeds over 20 MPH. (STI-06) XLRRX 06/18 Safety Section 1-9 © 2018 Alamo Group Inc.

  • Page 14: Maintenance And Service Safety Instructions And Practices

    Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death. (SG-14) XLRRX 06/18 Safety Section 1-10 © 2018 Alamo Group Inc.
  • Page 15 The use of “will fit” parts may reduce equipment performance, void warranties, and present a safety hazard. Use genuine Bush Hog parts for economy and safety. (SPBH-2) SEE YOUR BUSH HOG DEALER XLRRX 06/18 Safety Section 1-11 © 2018 Alamo Group Inc.

  • Page 16: Storage And Parking Safety Instructions And Practices

    Safety Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment. (SG-18) XLRRX 06/18 Safety Section 1-12 © 2018 Alamo Group Inc.

  • Page 17: Decal Location

    (Some shipping and handling charges may apply). Contact your Bush Hog dealer to order replacement decals. XLRRX 06/18 Safety Section 1-13 © 2018 Alamo Group Inc.
  • Page 18 SER PLT Serial Plate 50080671 ________ Operator’s Manual - XLRRX 94359 REFLCTR SMV Sign 50035829 ________ Canister 02969728 ________ Bolt 70232C ________ Flatwasher 70092C ________ Locknut * Furnished by tractor manufacturer. XLRRX 06/18 Safety Section 1-14 © 2018 Alamo Group Inc.

  • Page 19: Decal Description

    SAFETY Decal Description XLRRX 06/18 Safety Section 1-15 © 2018 Alamo Group Inc.
  • Page 20 SAFETY XLRRX 06/18 Safety Section 1-16 © 2018 Alamo Group Inc.
  • Page 21 SAFETY XLRRX 06/18 Safety Section 1-17 © 2018 Alamo Group Inc.
  • Page 22 SAFETY XLRRX 06/18 Safety Section 1-18 © 2018 Alamo Group Inc.

  • Page 23: Federal Laws And Regulations

    Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.) XLRRX 06/18 Safety Section 1-19 © 2018 Alamo Group Inc.

  • Page 25: Introduction Section

    INTRODUCTION SECTION Introduction Section 2-1 © 2018 Alamo Group Inc.
  • Page 26 Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR INJURY. Identifies special instructions or procedures that, if not strictly observed, could result in damage to, or destruction of the machine, attachments or the environment. XLRRX 06/18 Introduction Section 2-2 © 2018 Alamo Group Inc.
  • Page 27 Actuator selector allows for quick adjustments to working width and windrow width from tractor seat The front, rear, left, and right are determined by the normal direction of travel, the same as driving an automobile. XLRRX 06/18 Introduction Section 2-3 © 2018 Alamo Group Inc.
  • Page 28 NOTE: Warranties are honored only if completed “Owner Registration and Warranty” forms are received by Alamo Group within thirty days of delivery of the implement. 3. Record the Rake Model and Serial Numbers on the Warranty page at the front of the Operator’s Manual.
  • Page 29 This information will be helpful to your dealer if parts or service are required. SERIAL NUMBER _________________________ MAKE CERTAIN THE WARRANTY DATE OF RETAIL SALE ____________________ HAS BEEN FILED WITH BUSH HOG SELMA, ALABAMA XLRRX 06/18 Introduction Section 2-5 © 2018 Alamo Group Inc.

  • Page 31: Assembly Section

    ASSEMBLY SECTION Assembly Section 3-1 © 2018 Alamo Group Inc.

  • Page 32: General Instructions

    Indicates a potentially dangerous situation which, if not avoided, could cause death or severe personal injury, including dangers which are present when protection is removed. Indicates a potentially dangerous situation which, if not avoided, can provoke less severe or minor injuries. XLRRX 06/18 Assembly Section 3-2 © 2018 Alamo Group Inc.
  • Page 33 Examples of general measurements for identifying the assembly accessories based on type. For tightening torques, see the table below (the class of the material is normally stamped on the head of the bolts). XLRRX 06/18 Assembly Section 3-3 © 2018 Alamo Group Inc.
  • Page 34 METRIC-INCHES CONVERSION TABLE XLRRX 06/18 Assembly Section 3-4 © 2018 Alamo Group Inc.
  • Page 35 Connect the horizontal drawbar (3) to the frame (2) using bolts (1) and nuts (4). Item 1: 8 Bolts M16x140 (5/8”x5-1/2”) DIN 931 Item 4: 8 Nuts M16 (5/8”) DIN 980 XLRRX 06/18 Assembly Section 3-5 © 2018 Alamo Group Inc.
  • Page 36 (5) to the drawbar (1) using the two pins (6), the fastening bolts (8) and the washers (7). To adjust the hitch (5), see Hitching the machine to tractor. XLRRX 06/18 Assembly Section 3-6 © 2018 Alamo Group Inc.
  • Page 37 Repeat the same operations on the other side of the machine Item4: 4 Pins ø25x58 (ø1x2-5/16”) Item 5: 4 Washers ø25 (ø1”) DIN 125A Item 6: 4 Pins ø6x35 (ø1/4”x1-1/2”) DIN 94 XLRRX 06/18 Assembly Section 3-7 © 2018 Alamo Group Inc.
  • Page 38 Item2: nº2 Pins ø20x60 (ø25/32”x2-23/64”) Item 3: nº4 Nuts M16 DIN 980 Item 4: nº4 Washers ø17 (ø21/32”) DIN 125A Item 7: nº2 Pins ø20x125 (ø25/32”x4-29/32”) Item 8: nº4 Spacer ø20-34x23 (ø25/32”-1-21/ 64”x57/64) XLRRX 06/18 Assembly Section 3-8 © 2018 Alamo Group Inc.
  • Page 39 Item 15: 2 Washer ø16 (ø5/8”) DIN 125A Item 16: 2 Nuts M16 (5/8’) DIN 980 Item 19: 12+12 Bolts M12x35 (15/32”x1.3”) DIN 933 Item 18: 12+12 Nuts M12 (15/32”) DIN 980 Item 21: 2 Plastic Caps XLRRX 06/18 Assembly Section 3-9 © 2018 Alamo Group Inc.
  • Page 40 Item 2: 24/28 Plastic Bushings ø35-42x26 (ø1-38”- 1-41/64x1-1/64”) Item 3: 12/14 Washers ø35-50x5 (ø1-3/8”-1-61/ 64x3/16’) Item 4: 12/14 Spring Pins 8x50 (ø5/16”x1-61/64”) DIN 1481 Item 6: 12/14 Grease Nipple M6 (15/64”) XLRRX 06/18 Assembly Section 3-10 © 2018 Alamo Group Inc.
  • Page 41 ASSEMBLY Fasten the spring assembly (A) to the arm (2) with the self-locking pin (1). Rotate until it clamps on to Item 1: 12/14 Pins ø16x36 (ø5/8”x1-13/32”) XLRRX 06/18 Assembly Section 3-11 © 2018 Alamo Group Inc.
  • Page 42 Item 2: nº1 Screw M22x150 DIN 931 (55/64”x5-57/ 64”) Item 3: nº1 Washer ø23 DIN 127B (57/64”) Item 4: nº1 Nut M22 DIN 934 (55/64’) XLRRX 06/18 Assembly Section 3-12 © 2018 Alamo Group Inc.

  • Page 43: Hydraulic System Assembly

    Item 5: 4 Split Washer ø8.4 (ø5/16”) DIN 127B Item 6: 4 Flatwasher ø8.4 (ø5/16”) DIN 125A Item 3: 4 Bolt M8x35 (5/16”x1-22/64”) DIN 931 8.8 Item 7: 1 Flow Divider Item 8: 1 Flow Diverter, Electric 3/8” XLRRX 06/18 Assembly Section 3-13 © 2018 Alamo Group Inc.
  • Page 44 Item 4: 4 Washer 1/2” Item 5: 4 Quick Coupling Item 6: 8 Double Sem-Collar ø16 (ø5/8”) Item 7: 2 Collar Plate Item 8: 2 Bolt TE M 8x60 (5/16”x2-23/64”) DIN 931 XLRRX 06/18 Assembly Section 3-14 © 2018 Alamo Group Inc.
  • Page 45 Item 2: 2 Hose L. 4950mm (16’3”) FD 1/4-MD 1/2” (12 Wheel) Item 3: 1 Bolt TE 8x60 (5/16”x2-23/64”) DIN 931 8.8 Item 4: 4 Double Semi-Collar ø16 (ø5/8”) Item 6: 2 T Fitting 1/4” Male-Male-Male XLRRX 06/18 Assembly Section 3-15 © 2018 Alamo Group Inc.
  • Page 46 Item 8: 4 Washer 1/4” Bonded Item 10: 4 Collar Plate Item 11: 4 Bolt M 6 x 60 (15/64” x 2-23/64”) DIN 912 8.8 Item 12: 16 Double Semi-Collar ø16 (ø5/8”) XLRRX 06/18 Assembly Section 3-16 © 2018 Alamo Group Inc.
  • Page 47 Screw the hoses (2) to flow divider valve (6). Pay attention to the number match, otherwise the hydraulic system will malfunction. Repeat the same operations of the other side of the machine. XLRRX 06/18 Assembly Section 3-17 © 2018 Alamo Group Inc.
  • Page 48 ASSEMBLY NOTE: When all of the assembly is completed, check to make sure that the connections have been properly made. Fasten the hoses with the collars. XLRRX 06/18 Assembly Section 3-18 © 2018 Alamo Group Inc.

  • Page 49: Electrical System Assembly

    NOTE: When the machine is detached from the tractor, the connector (4) of cable (5) can be disconnected, leaving the control box permanently in the tractor cab. XLRRX 06/18 Assembly Section 3-19 © 2018 Alamo Group Inc.

  • Page 50: Rear Center Rake Wheel Kit (Optional)

    3. Insert the nylon bushing (3) into arm (4). 4. Attach the arm (4) to the plate (1) using the pin (6), washers (5) and spring pins (7). Mount grease nipple (12) XLRRX 06/18 Assembly Section 3-20 © 2018 Alamo Group Inc.
  • Page 51 Item 4: 8 Flatwasher ø21 (ø13/16”) DIN 125A Item 5: 8 Spring Pin ø6x35 (15/64”x1-3/8”) DIN 1481 Item 8: 2 Pin ø20 L.110 (ø25/32” L.21/64”) Item 21: 1 Pin ø20 L.80 (ø25/32” L.3-9/64”) XLRRX 06/18 Assembly Section 3-21 © 2018 Alamo Group Inc.

  • Page 52: Rear Center Rake Wheel Kit Hydraulic System Assembly

    3. Connect the 1/4” female side (11) of the hose (9) to the T fitting (10). Correctly position hose (9) so that it does not get deformed or crushed when the cylinder is operating. Once this is done, tighten all the various components that had been left untightened earlier. XLRRX 06/18 Assembly Section 3-22 © 2018 Alamo Group Inc.
  • Page 53 Item 8: 1 Nipple 3/8”-3/8” Throttled Item 9: 1 Hose L. 730mm (25-3/16”) FD 1/4”-FD 3/8” Item 10: 2 Cross Fitting 1/4” Item 13: 1 Perforated Screw Fitting 3/8” Item 14: 1 Banjo 3/8” XLRRX 06/18 Assembly Section 3-23 © 2018 Alamo Group Inc.

  • Page 55: Operation Section

    OPERATION SECTION Operation Section 4-1 © 2018 Alamo Group Inc.
  • Page 56 Safety Messages. Always use good common sense to avoid hazards. (SG-2) Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3) XLRRX 06/18 Operation Section 4-2 © 2018 Alamo Group Inc.

  • Page 57: Standard Equipment And Specifications

    Operating Speed 14 mph 14 mph Weight (approx.) 2,855 lbs. (1298 kg) 3,240 lbs. (1423 kg) Tires 205-75/15 205 - 75/15 Minimum HP Required 50HP (36.7 KW 60HP (44 KW) XLRRX 06/18 Operation Section 4-3 © 2018 Alamo Group Inc.

  • Page 58: Operator Requirements

    Serious injury or death to the operator or others could result if the operator is under the influence of drugs or alcohol. (SG-27) TRACTOR REQUIREMENTS XLRRX 06/18 Operation Section 4-4 © 2018 Alamo Group Inc.

  • Page 59: Rops And Seat Belt

    Before getting onto the tractor, the operator must read and completely understand the implement and tractor operator manuals. If any part of either manual is not completely understood, consult an authorized dealer for a complete explanation. OPS-U- 0007 XLRRX 06/18 Operation Section 4-5 © 2018 Alamo Group Inc.

  • Page 60: Boarding The Tractor

    Use all handrails and steps for support and never rush or jump off the tractor. OPS-U- 0009 XLRRX 06/18 Operation Section 4-6 © 2018 Alamo Group Inc.

  • Page 61: Starting The Tractor

    Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. (S3PT-15) XLRRX 06/18 Operation Section 4-7 © 2018 Alamo Group Inc.

  • Page 62: Setting The Implement

    Before carrying out any maintenance, adjustments or repairs on the machine, switch off the tractor engine, remove ignition key, wait until all moving parts have come to a standstill. XLRRX 06/18 Operation Section 4-8 © 2018 Alamo Group Inc.

  • Page 63: Setting Working Width

    LED light that turns on when current is passing through. NOTE: Before replacing the fuse, check with expert personnel to ensure that there are no short circuit contacts in the electrical circuit. Ops-2387 XLRRX 06/18 Operation Section 4-9 © 2018 Alamo Group Inc.

  • Page 64: Power Supply Connector

    The replacement of the plug is possible by making attention to the arrangement of the electrical polarity. NOTE: The solenoid connector (Ops-2386) will be damaged if the connections of the cables are accidentally reversed (See Ops-2387). XLRRX 06/18 Operation Section 4-10 © 2018 Alamo Group Inc.

  • Page 65: Adjusting Rake Ground Pressure

    Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order. (SG-21) XLRRX 06/18 Operation Section 4-11 © 2018 Alamo Group Inc.

  • Page 66: Tractor Pre-Operation Inspection/Service

    Ensure the manual canister is secured to the equipment with the operator’s manual inside. • Ensure all safety signs are in place and legible. Replace missing, damaged, and illegible decals. OPS-U- 0011 XLRRX 06/18 Operation Section 4-12 © 2018 Alamo Group Inc.
  • Page 67 REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure. (SG-15) XLRRX 06/18 Operation Section 4-13 © 2018 Alamo Group Inc.
  • Page 68 • Make sure tires and wheel are in good condition. Make sure the wheel lug nuts are tight. OPS-RK-0005_A XLRRX 06/18 Operation Section 4-14 © 2018 Alamo Group Inc.
  • Page 69 The engine coolant fluid level is full The radiator is free of debris The air filter is in good condition Operator’s Signature:___________________________________________________ DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT XLRRX 06/18 Operation Section 4-15 © 2018 Alamo Group Inc.
  • Page 70 There is no evidence of Hydraulic leaks The tires and wheel(s) are in good condition Wheel lug nuts are tight Operator’s Signature:________________________________________________________ DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT XLRRX 06/18 Operation Section 4-16 © 2018 Alamo Group Inc.

  • Page 71: Driving The Tractor And Implement

    When operating in traffic always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. (SG-19) XLRRX 06/18 Operation Section 4-17 © 2018 Alamo Group Inc.

  • Page 72: Starting The Tractor

    When operating in traffic, always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. XLRRX 06/18 Operation Section 4-18 © 2018 Alamo Group Inc.

  • Page 73: Driving The Tractor And Rake

    Special attention should be paid to foreign debris, rough terrain, steep slopes, and passersby and animals in the area. OPS-U- 0015 XLRRX 06/18 Operation Section 4-19 © 2018 Alamo Group Inc.

  • Page 74: Setting Implement Into Work Position

    When the valve is in the The machine is in working position. “CLOSED” position, The tractor hydraulics must be set to float mode lever is perpendicular to the during operation axis of the threaded fittings. XLRRX 06/18 Operation Section 4-20 © 2018 Alamo Group Inc.

  • Page 75: Adjustment In Work Position

    25 1” (7.65 m) 28' (8.5 m) Before placing machine in work position: Check that nobody is within the machine pivoting area.If there is someone, make sure the person moves away. XLRRX 06/18 Operation Section 4-21 © 2018 Alamo Group Inc.

  • Page 76: Operating On One Side Only

    (C) will stay raised with the minimum extension. Adjust the angle and extension of the rake arm use as desired. The machine is ready to work on one side only. XLRRX 06/18 Operation Section 4-22 © 2018 Alamo Group Inc.

  • Page 77: Locking The Rake Wheel In The Raised Position

    As the severity of raking conditions increase, the ground speed should be decreased by selecting a lower gear to maintain the proper operating PTO speed. XLRRX 06/18 Operation Section 4-23 © 2018 Alamo Group Inc.

  • Page 78: Shutting Down The Implement

    Use extreme care to keep feet and hands from under the implement and clear of any pinch points caused by the tractor hitch arms and implement pins. OPS-RK-0009 XLRRX 06/18 Operation Section 4-24 © 2018 Alamo Group Inc.

  • Page 79: Disconnecting The Implement

    Use the Tongue Jack for lifting the Implement only. Overloading the Tongue Jack can cause failure with possible serious bodily injury or even death. (STI-04) XLRRX 06/18 Operation Section 4-25 © 2018 Alamo Group Inc.

  • Page 80: Rake Storage

    OPS-RK-0010_A Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. (SG-10) XLRRX 06/18 Operation Section 4-26 © 2018 Alamo Group Inc.

  • Page 81: Transporting The Tractor And Implement

    Use extreme caution and avoid hard applications of the tractor brakes when towing heavy loads at road speeds. Never tow the implement at speeds greater than 20 MPH (32 kph). OPS-U- 0018 XLRRX 06/18 Operation Section 4-27 © 2018 Alamo Group Inc.

  • Page 82: Transporting

    Please check that there aren’t any oil leaks. This could compromise the machine’s stability. While transporting the machine, the safety locks must always be locked, and while working, the safety locks must always be unlocked. XLRRX 06/18 Operation Section 4-28 © 2018 Alamo Group Inc.

  • Page 83: Transporting On Public Roadways

    Consult an authorized tractor dealer for lighting kits and modifications available to upgrade the lighting on older tractor models. OPS-U- 0021 XLRRX 06/18 Operation Section 4-29 © 2018 Alamo Group Inc.
  • Page 84 OPS- U- 0022 Reduce speed before turning or applying the brakes. Ensure that both brake pedals are locked together when operating on public roads. OPS-U- 0023 XLRRX 06/18 Operation Section 4-30 © 2018 Alamo Group Inc.

  • Page 85: Hauling The Tractor And Implement

    If during transport a hard braking, sharp turning, or swerving action was performed, stop at the next safe location to inspect the security of the load. OPS-U- 0026 TROUBLESHOOTING GUIDE XLRRX 06/18 Operation Section 4-31 © 2018 Alamo Group Inc.
  • Page 86 Avoid backing with teeth down. Excessive speed on rough terrain. Reduce speed. Narrow or deep ditches or furrows, Avoid or cross slowly. rocky ground. Too much weight on wheels. Adjust spring tension. XLRRX 06/18 Operation Section 4-32 © 2018 Alamo Group Inc.

  • Page 87: Maintenance Section

    MAINTENANCE SECTION Maintenance Section 5-1 © 2018 Alamo Group Inc.
  • Page 88 The machine consists mainly of ferrous material which must be disposed of according to the regulations in force in the country concerned. There is also a small amount of plastic which must be disposed of according to the regulations in force in the country concerned. XLRRX 06/18 Maintenance Section 5-2 © 2018 Alamo Group Inc.

  • Page 89: Lubrication

    At the Beginning of EACH Season: Read the Operator’s Manual Check the Tire Pressure Lubricate ALL Greasing Points Check the tightness if the Wheel Nuts with a tightening torque of 120 ft. lbs. XLRRX 06/18 Maintenance Section 5-3 © 2018 Alamo Group Inc.

  • Page 90: Tires

    The rods remaining outside the cylinder (whatever reason may be) must be carefully protected with a grease layer. XLRRX 06/18 Maintenance Section 5-4 © 2018 Alamo Group Inc.

  • Page 91: Bolt Torque Values

    When replacing bolts, always use the same grade of bolt as used originally. Use this chart as a guide to tightening all bolts. Torque values listed are for general use only. XLRRX 06/18 Maintenance Section 5-5 © 2018 Alamo Group Inc.
  • Page 93 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety...
  • Page 94 XLRRX V-RAKE XLRRX-SOM- 06/18 P/N50080671 Printed U.S.A...

This manual is also suitable for:

Bush hog xlrrx1226Bush hog xlrrx1428

Table of Contents