Table of Contents
Advertisement
Hydraulic System Assembly
The hydraulic cylinders are empty to start with and very hazardous uncontrolled movements
may take place when filling them.
It is recommended that the cylinders be filled before connecting them to the machine,
lowering and raising them several times with the controls until the air is removed from the
circuit. These operations must take place in conditions of complete safety, with the machine
connected to the tractor and the operator sitting in the driver's seat, making sure that no
persons or objects are within the range of movement of the machine.
When using the system for the first time, make sure there are no oil leaks. If there are any leaks, first of all,
tighten all fittings.
The assembly must be done with care and precision for the safety of the person(s) and to
ensure proper machine operation.
Assembly should be done on a flat, solid surface, using the proper tools and wearing
suitable clothing, making sure that all people not involved in the assembly are kept at a safe
distance.
1. Attach support (1) of the valve (8) together with support (2) of valve (7) to the holes (10) of machine frame
with four bolts (3), split washers (5), flat washers (6) and nuts (4). The hose (9) is already fastened to
valves from factory.
Item 4: 4 Nut M8 (5/16") DIN 980
Item 5: 4 Split Washer ø8.4 (ø5/16") DIN 127B
Item 6: 4 Flatwasher ø8.4 (ø5/16") DIN 125A
Item 3: 4 Bolt M8x35 (5/16"x1-22/64") DIN 931 8.8
Item 7: 1 Flow Divider
Item 8: 1 Flow Diverter, Electric 3/8"
XLRRX 06/18
© 2018 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-13
Advertisement
Table of Contents
