Temperature Setting Section - Sony SNC-DP10 User Manual

Table of Contents

Enlarged version

Shutter

Select the shutter speed of the electronic shutter. You can

select one of 16 levels from 1/7.5 to 1/10000. In the

factory, it is set to 1/7.5.

Gain

Select and display the value of the camera AGC (Auto

Gain Control). You can select and display one of 19

levels from 0 to 36 dB.

Your setting will be temporary, because an optimum

level is selected to suit the brightness of the object.

TvStandard

Select the video format of the output video signal from

NTSC and PAL.

When this setting is changed, the camera system

automatically restarts. Internet Explorer must be read

again because the communication line of the computer

is interrupted.

Mount

Select an installation form of the camera from Ceiling

and Desktop. When Ceiling is selected, the image from

the analog video output and the image sent to the

computer are turned around.

Note

In this viewer, the image may be turned around in the

display when the viewer is started up with Mount of

Camera section set to Desktop. This image is not

corrected if you set it to be turned around in Mount

setting.

When you use the camera with Desktop installation, we

recommend using the viewer ActiveX viewer.

Camera save

Save the setting contents for the camera in the flash

memory inside the camera.

Camera reset

Reset the setting contents for the camera to return them

to the factory settings.

Temperature setting section

Setting the Camera — Camera setting Page

Temperature

The value of the temperature sensor on the basal plate

inside the camera is displayed. The built-in fan is turned

on or off based on this value.

UpperLimitAlert