Setting The User - User Setting Page - Sony SNC-DP10 User Manual

Setting the User
— User setting Page
When you click User on the Administrator menu, the
User setting page appears.
Use this page to set the user names and passwords of
Administrator and up to 9 kinds of users (User 1 to User
9), and the access right of each user.
Administrator, User 1 to 9
Specify User name, Password, Re-type password and
Access right for each user ID.
User name
Type a user name between 4 and 16 characters.
Password
Type a password between 4 and 16 characters.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Note
If you type an incorrect character in the User name,
Password or Re-type password box, a message like the
following appears. In this case, click OK to cancel the
message and re-type the correct character.
Access right
Select the access right for each user from the drop-down
list. The rights afforded to each access right are as
follows:
Level 1 - Level 3: Allows monitoring of the camera
image and capturing the display.
Level 4: Allows all the access right as Administrator.
No access right: Use this option when you want to
prohibit access to this unit temporarily.
User access right
Select the level of the access right to require user
authentication.
The authentication dialog will appear where user
authentication is required.
Lvele 1: Performs user authentication when a user
accesses all pages.
Lvele 2 - Level 3: Performs user authentication when a
user accesses the Administrator setting menu page.
Lvele4: No user authentication is required to display
pages.
OK/Cancel
See "Buttons common to every setting page" on page
12.
Setting the User — User setting Page
21