Table of Contents
Advertisement
4 - Starting up
The hydraulic version
Make sure the indicated bolt B is not pressing hard on the sliding part,
the black nylon roller must run freely in the rail.
B
According to the spray device, the outer positioning is as well as in the
picture. To adjust to desired position, loosen the indicated bolt A, move
the spray device to correct position and tighten the bolt again.
A
Adjustment of inner 4 spray device
The optional S bracket, as indicated by the arrow in the photo, can be
mirrored 180º. Thereby the spray device is able to be positioned behind
the sprayer.
Undo the 2X 4 bolts, turn the bracket 180º and fi t all bolts again.
The Convert brackets provide a telescoping side adjustment, loosen
the indicated bolts, slide the inner boom tube to desired position, and
tighten again the bolts; just enough to let the nylon friction pads press
and hold it in position.
54
Advertisement
Table of Contents
