Table of Contents
Advertisement
6 - Maintenance
Lubrication
General information
Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt and
condensed water. Keep oil fi lling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly before
lubricating. Avoid skin contact with oil products for longer periods.
Always follow the quality and quantity recommendations. If no quantity is recommended, feed the lubricator until new
grease becomes visible.
Pictograms in lubrication & oiling plans designate:
1. Lubricant to be used (see "Recommended lubricants" below).
2. Recommended intervals. Shown in hours or with a symbol for
occasional maintenance.
3. Amount to be used. Only shown if an amount is specifi ed.
ATTENTION! If the sprayer has been cleaned with a high pressure
washer, lubrication of the entire machine is recommended.
Lubricating and greasing the mistblower
ATTENTION! Clean the Sprayer after use, as described in the chapter of Cleaning.
Flush liquid circuit with glycol / antifreeze liquid, or cooking oil diluted in water, to conserve liquid circuit.
Apply on outer surfaces of the sprayer anticorrosive wax or oil.
80
Advertisement
Table of Contents
