Capabilities; Operator Training; Replacement Parts - Eclipse ThermJet TJ0015 Design Manual

s (C
afety oNtiNueD
C
apabilities
o t
perator raiNiNg
r p
eplaCemeNt arts

)
Warning:
Eclipse products are designed to minimize the
use of materials that contain crystalline silica.
Examples of these chemicals are: respirable
crystalline silica from bricks, cement or other
masonry products and respirable refractory
ceramic fibers from insulating blankets, boards,
or gaskets. Despite these efforts, dust created by
sanding, sawing, grinding, cutting, and other con-
struction activities could release crystalline silica.
Crystalline silica is known to cause cancer, and
health risks from the exposure to these chemi-
cals vary depending on the frequency and length
of exposure to these chemicals. To reduce this
risk, limit exposure to these chemicals, work in a
well-ventilated area and wear approved personal
protective safety equipment for these chemicals.
Adjustment, maintenance and troubleshooting of the mechanical
and the electrical parts of this system should be done by quali-
fied personnel with good mechanical aptitude and experience
with combustion equipment.
The best safety precaution is an alert and competent opera-
tor. Thoroughly instruct new operators so they demonstrate
an adequate understanding of the equipment and its operation.
Regular retraining must be scheduled to maintain a high degree
of proficiency.
Order replacement parts from Eclipse only. Any customer-sup-
plied valves or switches should carry UL, FM, CSA,CGA and/or
CE approval where applicable.
Eclipse ThermJet Design Guide No. 205, 3/5/07