Advertisement
• Avoid bodily contact with earthed surfaces, such as pipes, heaters, ovens, and refrigerators.
There is a higher risk of electrical shock, when the body is earthed.
• Keep the machine away from rain or wet. The permeation of water in the power tool increases
the risk of an electrical shock.
• Do not misuse the cable to carry or hang the power tool, or to pull the plug out of the outlet.
Keep the cable away from heat, oil, sharp edges, or objects with moving parts. Damaged or
entangled cables increase the risk of an electrical shock.
• When working with a power tool outdoors, use only extension cords that are designed for
outdoors. The use of a extension cord designed for the outdoors reduces the risk of electrical
shock.
• In the case where the use of the power tool in a damp area is unavoidable, use a residual
current device to reduce the risk of an electrical shock.
PERSONAL SAFETY
• Make sure to pay attention to what you are doing and use caution while working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol, or
medication. The slightest distraction or inattention can result in serious injury.
• Wear personal protective equipment and always protective goggles. The wearing of personal
protective equipment, such as a dust mask, slip-resistant footwear, protective helmet, or ear
protectors, depending on the form or use of the power tool, reduces the risk of injury.
• Avoid an unintentional starting up. Make certain that the power tool is turned off, before it
is plugged into a power source and/or battery is attached, it is to be carried or picked-up. If,
while carrying the power tool, your finger is on the "on" switch or the machine is plugged in
while in the "on" position, this can result in serious injury or accident.
• Remove the adjustment tool or wrench, before turning on the power tool. A tool or wrench,
that is in a rotating machine part can cause serious injury.
• Avoid using unusual body-stance or posture. Make sure to have a secure stance and able to
maintain balance. As a result, it will be easier to control the power tool in unexpected situations.
• Wear proper clothing. Do not wear wide clothing or jewellery. Keep hair, clothing, and gloves
away from moving parts. Loose clothing, jewellery, or long hair, could get caught in the moving
parts.
• If a dust extractor or receptor can be attached, make sure that is is attached properly and is
used correctly. Use of a dust extractor can reduce the dangers of dust particles.
CAREFUL HANDLING WHILE USING POWER TOOLS
• Do not overload the machine. Use the correct tool for the job. Work better and safer with
the correct power tool, within the power capacity range.
• Do not use a power tool with a defective power switch. A power tool, that can no longer be
turned on or off, is dangerous and must be repaired.
• Pull the plug out of the outlet and/or remove the battery, before making adjustments to the
machine's settings, change parts, or storing the machine. These extra measures will help
prevent the unexpected starting of the power tool.
• Keep unneeded power tools out of the reach of children. Do not allow the power tool to be
used by a stranger or by persons who have not read this instruction manual. Power tools are
dangerous, when they are used by inexperienced persons.
• Take care of your power tool. Check to make sure, if moving parts are functioning properly
and not locking or jamming, if parts are broken or damaged in such a way that the mode of
operation of the power tool is affected. Allow damaged parts be repaired before using the
machine. Many accidents are caused by poorly maintained power tools.
• Keep cutting edges sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less prone to jamming or locking and are easier to handle.
• Use the power tool, accessory parts, replacement parts and etc. in accordance with these
instructions. Consider the working conditions and the task at hand. Using a power tool for a
purpose other than its intended use can lead to dangerous situations.
© by WilTec Wildanger Technik GmbH
Seite 18
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
