Maintenance; Cleaning; Storing And Packing; Test Points - R&S EB500 Getting Started

®
R&S EB500
3

Maintenance

3.1

Cleaning

Clean the outside of the R&S EB500 using a soft, lint-free dust cloth.
Damage caused by cleaning agents
Cleaning agents contain substances that may damage the R&S EB500, e.g.
solvent-containing cleaning agents may damage the front panel labeling or
plastic parts. Never use cleaning agents such as solvents (thinners, acetone,
etc), acids, bases, or other substances.
3.2

Storing and Packing

The R&S EB500 can be stored at the temperature range quoted in the specifications
(check the "Service" section in the Operating Manual). When it is stored for a longer
period of time the R&S EB500 should be protected against dust. The original pack-
ing should be used, particularly the protective caps at the front and rear, when the
R&S EB500 is to be transported or dispatched. If the original packing is no longer
available, use a sturdy cardboard box of suitable size and carefully wrap the
R&S EB500 to protect it against mechanical damage.
3.3

Test Points

There are voltage and temperature checks at many test points of the R&S EB500
modules. Some of these test points depend on each other. The error messaging
system considers these dependencies and reports only the causal source of errors.
A detailed guideline describing how to read each of the test points can be found in
the "Maintenance" section of the Operating Manual.
Getting Started 4072.8432.02 ─ 04
Maintenance
Cleaning
45