Options For The R&S Eb500; Panorama Scan ( R&S Eb500-Ps); Itu Measurement ( R&S Eb500-Im) - R&S EB500 Getting Started

®
R&S EB500
After browsing through the content by using the "Next Link" you can
always go back to any of the previous pages by pressing the
"Back" key.
2.4
Options for the R&S EB500
In the R&S EB500, additional features can be enabled by using options and
upgrades. Options can be purchased together with the R&S EB500 or at any time
after that. Apart from options there are also upgrades. Currently there is only one
upgrade available: the DF-upgrade: an existing R&S EB500 can be upgraded to get
the same features as a R&S DDF205. A brief description of the available options
and upgrades are listed below.
2.4.1
Panorama Scan ( R&S EB500-PS)
The R&S EB500-PS "Panorama Scan (PSCAN)" function is used to perform an
ultra-quick scan of a user-definable frequency range. It thus provides a quick over-
view of the spectrum occupancy. Changes caused by illegal radio services, inter-
ferences, transient emissions etc. can immediately be seen at a glance. The
R&S EB500 can be switched to "listen" mode simply by pressing a key. The signal
of interest can be selected, demodulated and analyzed by using the demodulation
frequency.
Refer to the operating manual for a detailed explanation.
2.4.2
ITU Measurement ( R&S EB500-IM)
With SW option R&S EB500-IM (ITU-Measurement) installed, the measurement
functions "AM modulation index", "FM frequency deviation", "PM phase deviation"
and "bandwidth measurement" are available in addition to level and offset mea-
surement.
Refer to the operating manual for a detailed explanation.
Getting Started 4072.8432.02 ─ 04
Options for the R&S EB500
Operation
36