Update Procedure - R&S EB500 Getting Started

®
R&S EB500
Receiver Firmware and GUI Update for EB500 with front control panel
After the console window has closed, the USB flash drive can be removed. It now
contains the updated installation file.
4.2.2

Update Procedure

Power off the R&S EB500, plug-in the USB flash drive into the USB port on the
R&S EB500 front-panel and restart.
Wait for the R&S logo to appear and press ESC to go into the boot menu. In the
boot-up screen that follows, use the arrow keys on the front-panel to move to "Hard
Disk" (see screenshot below) and press ENT.
Getting Started 4072.8432.02 ─ 04
Software and Firmware Update
51