Advertisement
WARRANTY
Finish Thompson, Inc (manufacturer) warrants this pump product to
be free of defects in materials and workmanship for a period of one
year from date of purchase by original purchaser. If a warranted defect,
which is determined by manufacturer's inspection, occurs within this
period, it will be repaired or replaced at the manufacturer's option,
provided (1) the product is submitted with proof of purchase date and
(2) transportation charges are prepaid to the manufacturer. Liability
under this warranty is expressly limited to repairing or replacing the
product or parts thereof and is in lieu of any other warranties, either
expressed or implied. This warranty does not apply to normal wear of
the product or components. This warranty does not apply to prod-
ucts or parts broken due to, in whole or in part, accident, overload,
abuse, chemical attack, tampering, or alteration. The warranty does
not apply to any other equipment used or purchased in combination
with this product.
The manufacturer accepts no responsibility for product damage or
personal injuries sustained when the product is modified in any way.
If this warranty does not apply, the purchaser shall bear all cost for
labor, material and transportation.
Manufacturer shall not be liable for incidental or consequential damages
including, but not limited to, process down time, transportation costs,
costs associated with replacement or substitution products, labor
costs, product installation or removal costs, or loss of profit. In any
and all events, manufacturer's liability shall not exceed the purchase
price of the product and/or accessories.
Warranty Registration
Thank you for your purchase of this quality Finish Thompson product.
Be sure to take a minute to register your pump at
Finishthompson.com/warranty.
Simply provide the model number, se-
rial number and a few other pieces of information.
ORDERING OF SPARE PARTS
Spare parts can be ordered from your local distributor. Always refer
to pump model number to avoid error.
OTHER FINISH THOMPSON PRODUCTS
Drum Transfer Pumps are available in sanitary construction, stainless
steel, polypropylene, PVDF and CPVC. Flows to 40 gpm, discharge
heads to 300 feet and viscosities to 100,000 cP.
Portable Mixers for turbine mixing and blending handle viscosities
to 1,000 cP with gentle, non-vortexing circulation. Available in 316
stainless steel construction.
Centrifugal Pumps in polypropylene, PVDF, and 316 SS are offered in
mag drive sealless or mechanical seal models. Pumps are capable of
330 gpm, up to 325 feet discharge head, and 220
F (104
C) maximum.
o
o
For more information, contact Finish Thompson Inc. or see our web
site at www.finishthompson.com.
Call our toll free Technical Service Hot line, 1-800-888-3743, if you
have any questions regarding product operation or repair.
5
Advertisement
