Turning Your Projector Off - NEC DLP Cinema NP-02HD User Manual

3. Projection of Images (Basic Operation)

3-7. Turning your projector off

1
Press the POWER button on the projector control panel for three seconds or longer.
The light is turned off, the POWER button indicator blinks green, and the STATUS indicator blinks orange (cooling state).
The fan will continue to rotate while cooling, and the amount of time remaining for cooling is displayed on the LCD screen.
The cooling-off time is 90 seconds.
When the cooling is finished, the POWER button indicator turns off and the status indicator lights orange (standby state).
KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30 seconds by
default. Buttons on the control panel do not function while KEY LOCK is on. (See page 38)
2
After the standby mode is set, turn off the projector's power switches in this order: first the pro-
jector power switch, then the light power switch.
ON
OFF
Light power switch
3
Turn the administrator key counterclockwise to the horizontal position, then remove it.
Administrator key
Administrator switch
40
ON
OFF
Projector power switch