Specifications - NEC DLP Cinema NP-02HD User Manual

6. Appendix

6-6. Specifications

6-6-1. Projector
Model name
Projection method
Panel resolution
Light type
Screen sizes
Contrast ratio
Lens adjustment function
Signal input ports
External Control
Power supply voltage
Input current
Power consumption
Cooling method
Noise level
Installation
Net weight
Dimensions
Environment
(Note 1) The video input slots are empty when the device is shipped. Input ports can be added by mounting option boards, which
are sold separately. (See page 78)
(Note 2) The value is typical.
(Note 3) A "C1 connection" is when the AC power is supplied to the projector power supply and the light power supply with a single
power cable.
A "C2 connection" is when the AC power is supplied to the projector power supply and the light power supply by separate
power cables.
* For the standards related to laser products to which this projector conforms, see the section "To ensure safe use of this unit, be
sure to read this before using the unit" (page 2).
* Note that these specifications and design can change without prior notice.
70
DLP Cinema Projector Head : NP-02HD
®
Light Module : NP-24LU01/NP-20LU01/NP-18LU01
3 chip DLP Cinema method
®
0.98-inch DC2K chip
2048 x 1080
Laser Diode
Max. 22 m (NP-24LU01)
Max. 20 m (NP-20LU01)
Max. 18 m (NP-18LU01)
@14ft-L / Screen Gain 1.8 (Depends on setup conditions)
2000:1 with DCI specified color representation
Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus, douser
When shipped from factory: Empty
(for mounting optional components) (Note 1)
RS-232C (D-sub 9pin) x 1
GPIO port (D-sub 37 pin) x 1
Service terminal (stereo mini jack) x 1
3D CTL (D-sub 15 pin) x 1
USB (Type A) x 1
Interlock port x 1
Ethernet port (G-bit RJ-45) x 1
With a C1 connection (Note 3):
Single-phase AC 200V-240V 50/60 Hz (projector power supply + light power supply)
With a C2 connection (Note 3):
Single-phase AC 100V-240V 50/60 Hz (projector power supply)
Single-phase AC 200V-240V 50/60 Hz (light power supply)
With a C1 connection (Note 3):
Projector power supply + light power supply: 18.1A
With a C2 connection (Note 3):
Projector power supply: 6.0A (for AC 100V), 2.9A (for AC 220V)
light power supply: 15.2A
With a C1 connection (Note 3):
Projector power supply + light power supply: 3,600W
With a C2 connection (Note 3):
Projector power supply: 599W (for AC 100V), 574W (for AC 220V)
light power supply: 3,026W
Air cooling system and liquid cooling system
50 dB or less
Orientation: Desk/ front, desk/ rear, ceiling/ front, ceiling/ rear
150 kg (total weight of projector and NP-24LU01 or NP-20LU01 light module. Not including the lens.)
141 kg (total weight of projector and NP-18LU01 light module. Not including the lens. )
697 mm (width) × 1,095 mm (depth) × 509.5 mm (height)
Operating temperature: 10 to 35°C
Operating humidity: 10 to 85% (non-condensing)
Storage temperature: -10 to 50°C
Storage humidity: 10 to 85% (non-condensing)
Operating altitude: 0 to 3000 m/9800 feet