Basic Operation (From Connecting To Devices To Displaying Images); Connecting The Multipresenter Stick To An Image Display Device And Turning On The Power - NEC DS1-MP10RX series Operation Manual

(from connecting to devices to displaying images)
4-1. Connecting the MultiPresenter Stick to an image display device and turning
1
Connect the included HDMI extension cable to the Multi-
.
Presenter Stick.
2
Connect the other end of the HDMI extension cable to the
.
HDMI input port on a display or projector.
3
Turn on the power of the display or projector.
.
4
Connect the included AC adapter to the MultiPresenter
.
Stick.
5
Connect the AC adapter to a power outlet.
.
6
Press the "HDMI" button on the remote control of the display or projector.
.
The MultiPresenter Stick's initial settings screen is displayed.
• The SSID and URL are displayed on the screen. The SSID indicates the identifier of the wireless LAN's access
point.
▸ ▸
NOTE
• Be sure to use the included HDMI extension cable to connect the MultiPresenter Stick to the display or projector.
• Check that the power of the display or projector is off when connecting the HDMI extension cable.
• Do not connect or disconnect the HDMI extension cable while the MultiPresenter Stick's power is on. The images
may not be displayed properly.
4. Basic operation
on the power
This is the MultiPresenter Stick's initial settings screen.
8
or