NEC DLP Cinema NP-02HD User Manual page 41

4
Shut off the AC power supply to the main unit from the circuit breaker, etc.
In the following instances, do not turn off the main power switch or disconnect the AC power. Doing so can damage
NOTE
the projector.
• While projecting images
• While the fan is running after the power is turned off
- While the projector is cooling down after the power was turned off.
- When using the NP-90MS01 or NP-90MS02: 90 seconds
- During IMB operation (when the projector is not in the standby mode)
3. Projection of Images (Basic Operation)
41