Attaching Adapter Plate To Projector - NEC NP2200 Installation And Assembly Manual

Ceiling mount for np1150, np2150, np3150, np3151w, np1250, np2250, np3250 and np3250w projector

Hide thumbs Also See for NP2200:

Align shoulder on connection block opposite notch in adapter plate. Attach adapter plate (I) to connection block

from projector mount assembly (A) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown.

NOTCH INDICATES

FRONT OF PROJECTOR

Note: The projector you are installing may differ in appearance from the sample illustrated below.

*Notch indicates front of projector.

Flip projector upside down. Fasten adapter plate (I) by using four spacers (K) and four M4 x 25 mm serrated socket pin

screws (J) as shown below. Tighten M4 x 25 mm serrated socket pin screws (J) using 4 mm allen wrench (B).

Visit the Peerless Web Site at www.peerlessmounts.com

Accessories listed in the included sheet, as well as other parts,

can be ordered through Peerless by calling 1-800-729-0307 or

visiting www.peerlessmounts.com.

CONNECTION BLOCK

SHOULDER

8 of 9

Spacers (K) go

between adapter plate

and projector.

ISSUED: 03-06-06 SHEET #: 055-9452-1

For customer care call 1-800-729-0307 or 708-865-8870.

Table of Contents