Ruckus Wireless SmartCell Gateway 200 Reference Manual page 36

DHCP Option 82
By default, the DHCP Option 82 Circuit_ID is set with the following information:
• AP_IP:AP_Mac:SVLAN:VLAN:Zone_ID:SSID_string
• SSID_string stands for WLAN SSID
• For QinQ(L2) access, the SVLAN/VLAN is included in the Circuit_ID sub-
option. The AP_IP and AP_MAC fields are NULL.
• For non-QinQ access, SVLAN field is null and VLAN field includes the
VLAN_ID. If the UE packet is VLAN tagged, the AP IP address will always be
included. AP MAC is included only for Ruckus APs.
• The Zone ID field includes the 16-bit Zone ID from the zone config table in
hex characters.
• Option 82 D-blade IP includes the data plane's IP and MAC address, which is
e separated by a colon. This is the interface address required for sending it to
the core GW.
SmartCell Gateway 200 Tunneling Interface Reference Guide for SmartZone 3.4.1, 800-71380-001 Rev A
Tunnel Combinations and DHCP Processing
DHCP Processing
36