Simplified Test Procedure - Cablescan 128/PC Instruction Manual

Page 10
MODEL 128
1. Press RESET.
2. Install appropriate adapter cards for the cable to be tested.
3. Install cable or harness to be tested.
4. Press TEST; observe Passed on Display.
5. Remove tested cable or harness, and install the next cable to be tested.
If Failure Encountered (Open or Short):
5a) Repair fault, or press TEST again to view additional errors.
5b) To get a hardcopy of the errors, press RESET, and then ERROR LIST.
2
LEARN
4
Figure 6. Simplified Test Procedure
3, 5 2
ERROR
SEARCH
LIST
MENU
RUN
5b 4, 5a
Model 128/PC Instruction Manual
TEST RESET
1