Program Storage - Cablescan 128/PC Instruction Manual

Page 8

PROGRAM STORAGE

Refer to Save Program (menu-selected) in the Operating Instructions section for details.
1. The 4-digit signature code is used to identify wire list programs in memory. Record the
signature code for the cable assembly. (Refer to Signature Codes in System Overview
section.)
2. Insert the supplied microphone plug into Enable jack on rear panel.
3. Press RESET, and then arrow down to step through the menu until Save Program is
displayed.
4. Press MENU RUN to initiate Save Program. (Refer to Save Program in Operating
Instructions section.) After the program is saved, the display will show "Saved
XXXXXX," where XXXXXX is the signature code of the program.
Model 128/PC Instruction Manual