SPECTRA 1755, 1755EX, 1758 AND 1758EX PCB LAYOUT
Other than the location of the parts on the board and the items that have been indicated below, connections to these control
panels are identical to those on page 38.
CONNECTING SPEAKERS TO THE BELL OUTPUT
An optional siren driver is available with the Spectra 1755, 1755EX, 1758 and 1758EX control panels. This siren driver allows
you to connect speakers directly to the "bell" output as shown in the figure below. Minimum speaker rating = 30 watts.
# of 8Ω Ω speakers
1
2
2
NOTE: Other connection types can be used as long as the Bell Output does not exceed 2.5A.
Connection Type
-
8 Ohms
Series
16 Ohms
2 Series, 1 Parallel
6 Ohms
(Siren Driver Option Only)
Total Load
Average Current Draw*
800mA
460mA
1.8A
39
Spectra Series