Table of Contents
Advertisement
DISARMING & DEACTIVATING AN ALARM
To disarm an already armed system or to deactivate an alarm simply key in a valid access code. Program a designated entry/exit
point, such as the front door or the garage door with an Entry Delay Timer. When these entry/exit point are opened (breached), it
will set off a timer. The system will not generate an alarm until this timer elapses, giving users enough time to enter the premises
and disarm the system. Any user can disarm the system, except users have been assigned the Arm Only Option.
REGULAR ARMING
This method, commonly used for day-to-day arming, will arm all the zones in the selected partition.
If you make a mistake, the keypad will emit a "
"
" indication will turn on and the Exit Delay will be initiated. Please note that Regular Arming can also be activated using
ARM
Auto-Arming, a Keyswitch or using One-Touch Arming.
STAY ARMING
This method allows users to remain in the protected area while partially arming the system. For example, when going to sleep
at night, entry/exit points like doors and windows can be armed while other zones like motion detectors remain deactivated.
Please note that Fire Zones can not be bypassed.
If you make a mistake, the keypad will emit a "
"
" indication will appear and the Exit Delay will be initiated. Stay Arming can also be activated using Auto-Arming, Keyswitch
ARM
Arming or using One-Touch Arming. Also note that the User Code must have the Stay Arming Option enabled.
How Do I Disarm the System or Deactivate an Alarm?
1) Key in your [
ACCESS CODE
The arm or alarm indication will turn off and the keypad will emit a "
".
FIRMATION BEEP
IF YOU HAVE ACCESS TO BOTH PARTITIONS:
2) Press the button corresponding to the partition you wish to Disarm or
to Disarm both partitions, press the [1] key then after the
confirmation beep press the [2] key.
How Do I Regular Arm?
1) Green "
" indicator must be illuminated. Unless the system is
READY
partitioned, in which case all zones in the desired partition must be closed.
2) Key in a valid [
ACCESS CODE
IF YOU HAVE ACCESS TO BOTH PARTITIONS:
3) Press the button corresponding to the partition you wish to Arm. To
Arm both partitions, press the [1] key then after the confirmation
beep press the [2] key.
REJECTION BEEP
How Do I Stay Arm?
1) All zones in the desired partition (except Stay Zones) must be closed.
2) Press the [
] button
STAY
3) Key in a valid [
ACCESS CODE
IF YOU HAVE ACCESS TO BOTH PARTITIONS:
4) Press the button corresponding to the partition you wish to Stay Arm.
To Stay Arm both partitions, press the [1] key then after the
confirmation beep press the [2] key.
REJECTION BEEP
]
]
". When you have correctly armed the system, the appropriate
]
". When you have correctly Stay Armed the system, the appropriate
-
CON
Spectra Series
31
Hide quick links:
Advertisement
Table of Contents
