Operation; Ambient Conditions During Operation; Switching On The Device (Atmos® S 61 Corian® Integral); Switching Off The Device (Atmos® S 61 Corian® Integral) - Atmos S 61 Corian Series Operating Instructions Manual

Instruments and integral
Table of Contents

Advertisement

4 Operation

4.1 Ambient conditions during operation

• Temperature:
• Relative humidity:
• Air pressure:
4.2 Switching on the device (ATMOS® S 61 CORIAN®
1. Press the O
corresponding operating instructions.
»
The ATMOS® S 61 CORIAN® integral product is now switched on.
2. If necessary, switch on the devices stored in the ATMOS® S 61 CORIAN® integral.
Observe the corresponding operating instructions.
4.3 Switching off the device (ATMOS® S 61 CORIAN®
1. Press the O
corresponding operating instructions.
»
The ATMOS® S 61 CORIAN® integral product is now switched off.
2. If necessary, switch off the devices stored in the ATMOS® S 61 CORIAN® integral.
Observe the corresponding operating instructions.

4.4 Using the drawers

12 Operation
integral)
/O
button on the ATMOS® S 61 Servant ENT workstation. Observe the
n
ff
integral)
/O
button on the ATMOS® S 61 Servant ENT workstation. Observe the
n
ff
1
2
+10 to +35°C
30 to 95% without condensation
700...1060 hPa
Opening the drawers
1. Press against the drawer
»
The drawer will open.
Closing a drawer without a Servo-Drive®
1. Push the drawer
Closing a drawer with a Servo-Drive®
1. Push the drawer
automatically.
.
1
in until it clicks closed.
2
closed until it is pulled in
2

Advertisement

Table of Contents
loading

Table of Contents