Table of Contents
Advertisement
8 SHIPPING AND TRANSPORTATION
When shipping the machine to get it repaired or transporting it to another location, we
advise to use the original box and lock the head with head locking tool.
Contact your local distributor for support and shipping information.
1.
Go to Settings -> Move to transport (attention, the head will start to move!)
2. Remove USB and power cables within 30 seconds.
3.
Connect the locking tool firmly with 4 supplied screws
4. Place the machine in the original box or use a custom hard box
5.
Optional: add instructions for technician if you are shipping it for repair. Samples
with bad print result and explanation can help to identify the issue faster.
6. Make sure the box is fastened firmly with straps or a very strong tape
Figure 67: Attach the locking tool and add cardboard supports
Peleman Industries
Flat Bed Foil Printer User Guide
Tip: Scan the QR code to access
the demonstrational video
71
Advertisement
Table of Contents
Troubleshooting
