Figure 6: Lock Tool And Support Removal; Figure 7: Flat Bed Foil Printer Connections - Peleman Flat Bed Foil Printer User Manual

Flat Bed Foil Printer User Guide

Figure 6: Lock Tool and Support Removal

Connect the Flat Bed Foil Printer to the computer with the provided USB cable. Make sure
your computer has a grounded connection to the power supply.
Attention! Make sure the printing table is clear of objects and the lock tool has
been removed.
Plug the power adapter into an electrical outlet to power the device. Printer will move to
'home position'.
Open the installed software (see section below) to check if the printer is connected to your
computer.

Figure 7: Flat Bed Foil Printer Connections

15
Peleman Industries