Creating A New Design; Figure 15: New Design Startup Dialog Box For Selection Of Template; Figure 16: Display For Selection Of Appropriate Template & Associated Object Orientation - Peleman Flat Bed Foil Printer User Manual

Flat Bed Foil Printer User Guide

5.5 Creating A New Design

Figure 15: New Design Startup Dialog Box for Selection of Template

Select the template that matches the object to be printed on from the list. You have the
option to create a new template and select it afterwards from the 'User' tab or to select it
from a list of preset templates. Template names refer to PELEMAN product names.
Make sure that the print object matches the selected template. Failure
Figure 16: Display for Selection of Appropriate Template & Associated
object Orientation
28
to do so can cause severe damage to the printer.
To create a new design, click
on the New Design option
from the listed possibilities. A
new tab will open and a dialog
box will appear as shown in
figure 15.
Once a template has been
selected, possible orientations
are displayed as shown in
figure 16. Place the object on
the printing table in one of the
given ways, and selection of
the same orientation on the
screen as well.
information about
orientation, please see section
5.5.1.
Peleman Industries
For more
object