Figure 26: Design Toolbar Group 5 - Element Alignment; Figure 27: Design Toolbar Group 6 - Rotation Degree - Peleman Flat Bed Foil Printer User Manual

Flat Bed Foil Printer User Guide
Group 5: Element Alignment
Align Left: Align the
left side of the
selected elements to
the same location
Align Centre: Align
the centres
selected elements to
the same location
If a single element is selected, the alignment buttons will align to the edges and centre of
the print area.
Group 6: Rotation Degree
36
Align Right:
right side of the selected
elements to the same
location
Align Top: Align the
top side of selected
of
elements to the same
location

Figure 26: Design Toolbar Group 5 - Element Alignment

Figure 27: Design Toolbar Group 6 - Rotation Degree

Align the
Align Middle: Align the
middles of the selected
elements to the same
location
Align in Centre of Closed Cover:
Align the centre of selected
elements to the centre of the
closed cover. The selected text
is also centered within the box
Align Bottom:
the bottom side of
selected elements to
the same location
Rotate:
elements to the required angle.
By default, the angle of rotation
for an element is 0 degree
Align
Rotate the selected
Peleman Industries