Print Margins; Figure 20: Margins (Grey Zone Around The Template) - Peleman Flat Bed Foil Printer User Manual

Flat Bed Foil Printer User Guide
Images can be imported to the print areas, and text can be typed inside these by using the
associated design toolbars described in toolbar group 1 and 2, respectively, of section 5.5.6.
Inserted elements can be moved around by using the same options as when altering print
areas. Only parts of the element placed inside the print area will be displayed and printed.
PRO Tip: Repeat the same design by selecting the print area (with your
design placed in it) and copy-pasting it on same spot (Ctrl+C – Ctrl+V).
The machine can print the selected design repeatedly up to 10 times on
the same spot.
It is recommended to have thick foil layer on the same object or
to make multiple prints on different objects.

5.5.5 Print Margins

In order to ensure the quality of the print, a certain size of margins always remains
unprintable. Thus, it is not possible to print edge to edge on any objects. These margins are
defined by the Flat Bed Foil Printer PC Tool and are unchangeable.
Standard margins are 19mm and we advise these margins to prevent errors/incorrect head
placement. Narrow margins are 8mm and available during custom template creation.
Section 10.5.1 may be referred to see the values of these margins.
Flat Bed Foil Printer PC Tool will automatically reject elements to be placed on these print
margins.

Figure 20: Margins (grey zone around the template)

32
Peleman Industries