Object Orientation; Figure 17: Design Window Based On Selected Template And Object Placement - Peleman Flat Bed Foil Printer User Manual

Click on Design Print button to open the new design based on the selected template and
associated object orientation. A screen similar to figure 17 will appear on the screen.

Figure 17: Design Window Based on Selected Template and Object Placement

With the help of available tools provided in the toolbar, create the desired text and graphics
to be printed on the cover. Section 5.5.6 of this document may be referred to for more
information on the toolbars.

5.5.1 Object Orientation

Important notes about object orientation:
•
Due to the printhead width, each section of the design box is 57 mm high
•
Printing is done from left to right in segments of 57 mm
•
All design elements must fit within the margins of the print areas. You can enlarge
print areas to over 57mm. In this case, when image or text does not fit within one
area between the dashed lines, the element will be split and made with 2 or more
strokes. In some printers, it can result in incomplete or imperfect areas.
•
Orientation must be considered according to the elements used in these fields
Read more about print areas in section 5.5.4.
Peleman Industries
Flat Bed Foil Printer User Guide
29