Using The Remote; Changing The Input Button Assignments - Sony STR-DN610 Operating Instructions Manual

SYSTEM menu
You can customize the settings of the receiver.
x DIMMER
Lets you adjust the brightness of the display in
3 levels.
x SLEEP
Lets you set the Sleep Timer on the receiver to
turn off automatically at the specific time. For
details, see "Using the Sleep Timer"
(page 39).
x AUTO.STBY
Lets you set the receiver switch to standby
mode automatically after 30 minutes when
you do not operate the receiver or when there
is no signals input to the receiver.
• STBY ON
Switches to standby mode after
approximately 30 minutes.
• STBY OFF
Does not switch to standby mode.
Notes
• This parameter does not work when TUNER input
is selected.
• If you use the Auto Standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
x NAME IN
Lets you set the name of inputs. For details,
see "Naming inputs" (page 38).

Using the Remote

Changing the input button
assignments
You can change the initial settings of the input
buttons to suit the components in your system.
For example, if you connect a Blu-ray disc
player to the DVD jack on the receiver, you
can set the DVD button on this remote to
control the Blu-ray disc player.
Note
You cannot change the remote assignments for TV,
VIDEO 2, DMPORT, TUNER, HDMI 2 and
HDMI 3 input buttons.
Numeric
BD DVD
buttons
TV VIDEO1
SA-CD/
DMPORT
CD
HDMI 1 HDMI 2
1
While holding down the input
button of which you want to
change the assignment, hold
down AV ?/1.
Example: While holding down DVD,
hold down AV ?/1.
2
With the AV ?/1 button held,
release the input button you
selected in step 1.
Example: With the AV ?/1 button held,
release DVD.
AV ?/1
Assignable
Input
SAT/
CATV
buttons
VIDEO2
TUNER
HDMI 3
continued
GB
69