Table of Contents
Advertisement
a)
Notes on the SPEAKERS SURROUND BACK/
BI-AMP/FRONT B terminals connection.
– If you connect only one surround back speaker,
connect it to the L of this terminals.
– If you are not using surround back speaker, and
you have an additional front speaker system,
connect the additional front speaker system to
this terminals.
Set "SB ASGN" to "SPK B" in the SPEAKER
menu (page 65).
You can select the front speaker system you
want to use with the SPEAKERS button on the
receiver (page 31).
– If you are not using surround back speaker, you
can connect the front speakers to this terminals
using bi-amplifier connection (page 19).
b)
When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.
Notes
• Before connecting the AC power cord (mains
lead), make sure that metalic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• After you have install and connect your speaker, be
sure to select the speaker pattern from SPEAKER
menu (page 63).
Bi-amplifier connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
Front speaker
(Right)
Hi
HDMI
ASSIGNABLE (INPUT ONLY)
N I
3
N I
2
N I
1
ANTENNA
IN
Y
Lo
TV
P
B
/
OPTICAL
C
B
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
IN
IN
OUT
IN
OUT
SAT/
CATV
/
IN
R
P
C
R
OPTICAL
IN 3
IN 2
IN 1
MONITOR
OUT
MONITOR
DVD
IN
COMPONENT VIDEO
ASSIGNABLE (INPUT ONLY)
COAXIAL
AUDIO
AUDIO
AUDIO
AUDIO
AUDIO
AUDIO
AUDIO
DIGITAL
(ASSIGNABLE)
OUT
IN
IN
IN
IN
OUT
IN
L
AUDIO
OUT
DC5V
R
0.7A MAX
DMPORT
SA-CD/CD/CD-R
TV
SAT/CATV
BD
VIDEO 1
SUBWOOFER
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
After you have made the bi-amplifier
connection, set "SB ASGN" to "BI-AMP" in
the SPEAKER menu (page 57).
Front speaker
(Left)
Hi
TV OUT
ARC
Lo
FRONT A
CENTER
SURROUND
L
R
L
R
SPEAKERS
IMPEDANCE USE 8-16
GB
19
Hide quick links:
Advertisement
Table of Contents
