Panasonic KX-TD816JT Programming Manual page 77

Area Bit
08 12 Clears "Total Call" in all group numbers
at the monitoring display or not, when
the night mode is switched to the day
mode.
13 Selects to show incoming call display
(CLIP) or the number/name of the
original extension when transferring an
incoming outside call to an extension
(Call Transfer, Screened - to Extension).
The system allows to choose between
three display types when an incoming
call is received in programme [612]
Incoming Call Display.
14-15 Reserved
16 Selects the time that the system
disconnects the outside line after the
other party hangs up during a
conversation between the proprietary
telephone (PT) and the Outside line.
09 1 Detects the Continuous Tone or not,
when the Tone Detection has been
assigned to "Enable" in programme
[810] DISA Tone Detection.
2 Detects the Cycled Tone or not, when
the Tone Detection has been assigned to
"Enable" in programme [810] DISA
Tone Detection.
3 Detects the No Tone or not, when the
Tone Detection has been assigned to
"Enable" in programme [810] DISA
Tone Detection.
4 Selects the type of Tone, when dialling
the feature number to seize the outside
line through Automatic Route Selection
(ARS).
5 Reserved
6 Allows to use "99" as an account code
delimiter or not.
Programming Guide
Explanation for Areas 08 and 09
Description Selection Default
0 : clear
1 : do not clear
0 : number/name
of the original
extension
1 : CLIP
0 : 3 s
1 : 15 s
0 : do not detect
1 : detect
0 : do not detect
1 : detect
0 : do not detect
1 : detect
0 : Tone 4
1 : Tone 1
0 : deny
1 : allow
2.2 Optional Programming
Feature Guide
References
1 Call Monitoring in
UCD / Ring Group
1 Call Transfer
1 None
1 DISA
1 DISA
1 DISA
1 Automatic Route
Selection (ARS)
1 Account Code
Entry
77