Ps Termination - Panasonic KX-TD816JT Programming Manual

1.1 DECT Programming

[651] PS Termination

Description
Deletes a stored PS so that it cannot be used in the system.
Selection
• PS registration number:
KX-TD816 – 01 through 16
KX-TD1232 – 01 through 64
Default
Not applicable
Programming
1.
Enter 651.
Display: TERMINAZIONE PS
2.
Press NEXT.
Display: NUM PS?
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:INT 281
4.
Press STORE.
Display: ESECUZIONE
The system searches for the PS registration number while "Executing" is blinking, and
deletes the registration after it is found.
Display example: CANCELLATO
5.
To delete another PS, press NEXT or PREV, or SELECT and the desired PS registration
number.
6.
Repeat steps 3 through 5.
7.
Press END.
Even if "Rejected" is displayed in step 4 above, you can delete the PS. In this case,
Registration Clear on the PS (PS Programming) is required.
Display: RIFIUTATO (The PS was not deleted correctly.)
The display will show the next example below in a few seconds.
Display example: CANCELLARE?
8.
Go to Step 7 if you do not want to delete.
9.
Press STORE.
14 DECT Programming