Panasonic KX-TD816JT Programming Manual page 11

(With a PS)
6.
Press the POWER button for a while (about 5 seconds).
7.
Press the FUNCTION button.
8.
Press the FUNCTION button again.
Or Press the UP/DOWN button repeatedly until "PROGRAM" is selected and then press the
SELECT button.
9.
Press the UP/DOWN button repeatedly until the display below is selected.
Display: PRG. INIZIALE
10.
Press the SELECT button.
11.
Press the UP/DOWN button repeatedly until the display below is selected.
Display: REGISTRAZIONE
12.
Enter the SELECT button.
13.
Press the UP/DOWN button repeatedly until the desired DECT system number is
selected.
Display example:REGISTRAZIONE
14.
Press the SELECT button.
Display example: IMMETTERE CODICE
15.Enter the PS password
Display example: IMMETTERE CODICE
16.
Press the AUTO/OK button.
Display: ESECUZIONE
You will hear a confirmation tone and the display changes as follows.
Display example: DECT-SYS BLOC.
17.
Enter the UP/DOWN button to select "DISABLE" or "ENABLE" for the System Lock.
Display example: DECT-SYS BLOC.
DECT Programming
DECT-SYS 1
DECT-SYS 2
=--------
.
=****----
ABILITATA
DISAB
ABILITATA
DISAB
1.1 DECT Programming
11