Trackball - Siemens SIMATIC PG 720 P Manual

3.4

Trackball

Trackball
The trackball is a pointing device for cursor control and menu selection in
many programs that support mouse operation. By moving the trackball, the
cursor can be positioned anywhere on the screen.
By pressing the left-hand button, you set a marker. The function of the
right-hand button depends on the particular program you are using. You can
select objects or items in a menu and start functions with the trackball.
Cleaning the
The trackball is in a roller housing which normally prevents dust collecting
Trackball
on the ball or transmission mechanism. Nevertheless, you should clean the
trackball at regular intervals.
To clean the trackball, proceed as follows:
1. Switch off your programming device.
2. Remove the cover of the trackball housing by turning it anti-clockwise,
3. You can now take the trackball out of its housing.
4. Wash the trackball in a solution of tap water and mild cleansing agent.
5. Blow any residual dust out of the trackball housing.
6. Dry the trackball and return it to its housing.
7. Replace the cover and tighten it by turning it in a clockwise direction.
PG 720 P Programming Device
C79000-G7076-C721-02
for example by inserting tweezers or a similar tool into the holes in the
ring.
Getting to Know the PG 720
3-13