Siemens SIMATIC PG 720 P Manual page 13

Keyboard Angle When the keyboard is attached to the unit, its angle of inclination is 6 , the
height of the middle row of keys is 30 mm (about 1 inch). When it is
detached, the angle of inclination is 4.5 , and the height of the middle row of
keys is 27 mm. This is an ideal ergonomic design to allow a comfortable
working position.
Horizontal If no table or desk is available, the unit can be operated on the floor. You can
Position adjust the casing and display through approximately 90
Adjustment plane.
Figure 2-4 Horizontal Operating Position Without Keyboard
Wall Mounting
The basic unit can be attached to a wall. Four drilled holes (6 mm diameter)
are provided in the unit stand for this purpose.
Figure 2-5
PG 720 P Programming Device
C79000-G7076-C721-02
Pivot
Stand Support
ø6
Drilling Template for Wall Mounting (dimensions in millimeters)
Unpacking and Setting Up the PG 720
o
into the horizontal
CD-ROM drive
Extra support hoop
267
2-5