Start/Simulate Program - Siemens SINUMERIK 802D Short Manual

2. Create/Edit Program

Start/Simulate Program

Prerequisite:
•
Automatic mode is selected.
•
Existing program is open.
Execute
Simulation
Call
...
Call G17/
G18/G19
Show
all
Zoom +
Zoom -
To
origin
Zoom
Auto
Cursor
coarse/fine
Delete
display
Edit
2-18
Start program
Select program to be executed.
NC-Start is used to start the
program.
Simulate program
Select Simulation and start with
NC start.
Call submenu to show:
Select plane.
Show the complete workpiece.
Enlarge the size of the display.
Reduce the size of the display.
Select the start screen of the
simulation.
Automatic scaling of the
selected tool path.
Change cursor increment.
Delete simulation display.
Return to edit mode.
© Siemens AG, 2001. All rights reserved
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
09.01