Ordering Spare Parts; Troubleshooting - JAUDT FSV 6110 Series Translation Of The Original Operating Instructions

Operating Instructions FSV 6110...
9

Ordering spare parts

Send your spare parts order by mail to verkauf@jaudt.de
If you have a JAUDT customer number you can also order spare parts at www.jaudt.de.
Please give us the following information when ordering spare parts:
Name and item from the spare parts list (appendix)
Order no. and type of the JAUDT slide valve according to the type plate
Example:
Suppose you require a new slide plate. We need the following details:
Slide plate, item 5, No. 120610.0107
Order no. according to type plate, e.g. AB03-0211
Type according to type plate, e.g. AB03-0211.10 or 600808.4002
10

Troubleshooting

Error
Leak to the outside on slider
plate
Leak in passage through the
slider plate
Slider plate jerks or does not
move
Pulse generator does not
generate any signals
© BA6110.0002_EN_Rev11.docx
or by fax to ++ 49 (0)821 7960567.
Cause
Glands worn
Glands not sealed
Slider plates worn or with product
accumulation
Non-specified use
Product accumulation on the
slider plate or casing
Seal in passage (if there is one)
worn
Non-specified use
Product accumulation on slider
plate including guides or in casing
Glands worn or excessively
stressed
Drive or power supply and
controller defective
Pulse generator defective
Actuation element loose or pulse
generator maladjusted
Limit settings are not reached
Remedy
Replace glands
Tighten glands
Clean or replace slider plate
Check conditions of use (for
example pressure and
temperature)
Clean
Replace seal
Check conditions of use (for
example pressure and
temperature)
Clean
Replace or adjust glands
Check and repair
Replace
Check and repair
Remove accumulations or
foreign bodies; Check drive unit
and power supply
Page 15 of 19