Noise Emission; Transport And Storage; Transport; General Storing Instructions - JAUDT FSV 6110 Series Translation Of The Original Operating Instructions

Operating Instructions FSV 6110...
2.1.3 Misuse
JAUDT vario-slide valves must not be used to meter or shut off aggressive liquids (acids,
alkaline solutions) and liquid foods.
The conditions of use must not exceed the load limits of the materials used (e.g. corrosion, temperature).
JAUDT vario-slide valves which are intended for manual operation must not be connected to an external
drive.
For instance, the chain drive must not be connected to a motor drive.
2.2

Noise emission

The noise emission is 85 dB (A) in the productless operation. With higher noise emission in the plant group
and in the regular operation suitable measures are to be met by the plant engineer.
3

Transport and storage

3.1

Transport

To ensure the O-ring seal (optional) is not damaged, JAUDT vario-slide valves should only be trans-
ported and stored in the "Slide valve closed" -position.
Transport the slide valve lying on its discharge flange.
Secure the slide valve properly to prevent it suffering shocks and blows and prevent damaging the
paintwork by placing suitable elements between the securing tape and the slide valve.
Secure the slide valve to prevent it slipping and protect the particularly exposed parts such as the
drive unit and accessories.
3.2

General storing instructions

Store the slide valve lying on its discharge flange.
Cables, hose lines, the drive unit and mounted accessories must be protected properly from damage.
Recommended storage temperature -10°C...+40°C.
Max. relative humidity 65%.
Store the device in a dry, dust-free place and pay attention to the storage temperatures, especially in
extreme climes like the tropes, the desert, or very cold regions.
Do not store device in aggressive atmosphere or together with aggressive media like acid, oil, dissol-
ver or salt.
Precautions for a long-term storage (more than three months):
Protect unfinished device parts with an anti-corrosion coating, e.g. with a film of oil.
Seal the device against the ingress of dust and moisture.
Operate the device once a year.
Do not store the device more than four years.
© BA6110.0002_EN_Rev11.docx Page 5 of 19