Table of Contents
Advertisement
Operating manual DKV 6008...
5.1
Ordering spare parts
Send your spare parts order by mail to
If you have a JAUDT customer number you can also order spare parts at www.jaudt.de.
When order spare parts please quote the following information:
Designation and item number from the spare parts list (section 5)
Order No. and model of the JAUDT valve from the model plate.
Example:
For example you require a new sealing plate. We require the following information:
Sealing plate Item No. 1
Order No. from the model plate, for example AB03-0211
Model from the model plate, for example AB03-0211.10 or 600808.4002
6
Troubleshooting
Error
Leak on the outside of the pivot
bolt
Leak in passage
Difficult movement
Pulse generator does not gen-
erate any signals
© BA_DKV_EN_Rev07-2010.DOC
verkauf@jaudt.de
or by fax to ++ 49 (0)821 7960567.
Cause
– Seal or sealing plate worn
– Non-specified use
– Product accumulations in interior
– Seal or sealing plate worn
– "CLOSED" position not set pre-
cisely
– Non-specified use
– Product accumulations in interior
– Drive or power supply and control-
ler defective
Pulse generator defective
Actuation element loose or pulse
generator maladjusted
Limit settings are not reached
Remedy
– Replace
– Check conditions of use (for ex-
ample pressure and tempera-
ture)
– Clean
– Replace
– Set "CLOSED" position precisely
– Check conditions of use (for ex-
ample pressure and tempera-
ture)
– Clean
– Check and repair
Replace
Check and repair
Remove accumulations or for-
eign bodies; Check drive unit
and power supply
Page 13 von 20
Advertisement
Table of Contents
