Connect To Wi-Fi - Hayward VS Omni How-To Manual

How To: Connect to Wi-Fi
The following identifies how to connect to a 2.4Ghz Wi-Fi signal.
Step 1 Step 2
On the right of the dashboard locate and tap Select the "network" option, on the right side
the "config" icon. of the screen.
Step 3 Step 4
If no network has been setup prior, select the Enter the network password, followed by the
desired Wi-Fi signals, otherwise skip to Step 6. check mark to complete.
NOTE: The network password IS CASE SENSITIVE. To confirm connection, go to
11
Config>Network and verify IP addresses appear under the dynamic tab.