Table of Contents
Advertisement
Definitions for the DP Master
DMD File
Type File
Additional
Information
F-2
All slave-related characteristics are stored in a device master data (DMD)
file. The structure of the DMD file is defined in Standard DIN 19245, Part 3.
If you need the DMD file, you can retrieve it via modem under telephone
number 0911/737972.
You can also retrieve the DMD file under CompuServe in AUTFORUM (GO
AUTFORUM) in the SINEC library area.
All data of the DP slave needed for configuring with COM ET 200 are con-
tained in a type file.
If you need the type file, you can retrieve it via modem under telephone
number 0911/737972.
You can also retrieve the type file under CompuServe in AUTFORUM (GO
AUTFORUM) in the SINEC library area.
Additional information on the distributed I/O can be found in, for example,
the manual: ET 200 Distributed I/O System.
Communications Processor CP 541
EWA 4NEB 812 6188-02
Advertisement
Table of Contents
