Carrier Touch Pilot Junior Manual page 22

Point name Status
6 I_cr_no 0 to 20
7 I_cr_fu 0 to 20
8 cr_deg -16.7 to 16.7
-30.0 to 30.0
9
10 oathr_no -10.0 to 51.7
14.0 to 125.0
11 oathr_fu -10.0 to 51.7
14.0 to 125.0
12 dt_hr_no 0 to 13.9
0 to 25.0
13 dt_hr_fu 0 to 13.9
0 to 25.0
14 I_hr_no 0 to 20
15 I_hr_fu 0 to 20
16 hr_deg -16.7 to 16.7
-30.0 to 30.0
*Depends on the selected language (English by default).
User Configuration Menu – USERCONF
Point name Status
1 use_pass -
2 alert_r no/yes
*Depends on the selected language (English by default).
Schedule Menu – SCHEDULE
Point name Status
1 OCCPC01S -
2 OCCPC02S -
*Depends on the selected language (English by default).
Holiday Menu – HOLIDAY
Point name Status
1 HOL_MON 0-12
2 HOL_DAY 0-31
3 HOL_LEN 0-99
*Depends on the selected language (English by default).
Broadcast Menu – BROADCAST (BROCASTS)
Point name Status
1 Ccnbroad 0 to 2
2 OAT Broadcast
3 oatbusnm 0 to 239
4 oatlocad 0 to 239
5 dayl_sel disable/enable
Daylight Savings Select – Summer time (entering)
6 1 to 12
7 1 to 7
8 1 to 5
Daylight Savings Select – Winter time (leaving)
9 Stopmon 1 to 12
10 Stopdow 1 to 7
11 Stopwom 1 to 5
*Depends on the selected language (English by default).
22
Default Unit Displayed text*
0 mA Current No Reset Value
0 mA Current Full Reset Value
0 ^C Cooling Reset Deg. Value
0 ^F
HEATING RESET
-10.0 °C
OAT No Reset Value
14.0 °F
-10.0 °C
OAT Full Reset Value
14.0 °F
0 ^C
Delta T No Reset Value
0 ^F
0 ^C
Delta T Full Reset Value
0 ^F
0 mA Current No Reset Value
0 mA Current Full Reset Value
0 ^C
Heating Reset Deg. Value
0 ^F
Default Unit Displayed text*
11 - User Password
no -
Alarm Relay for Alerts?
Default Unit
- -
- -
Default Unit
0 -
0 -
0 -
Default Unit
2
0
0
disable
3
7
5
10
7
5
Description
Current no reset value
Current full reset value
Cooling reset deg. value
Heating reset parameters
OAT no reset value
OAT full reset value
Delta T no reset value
Delta T full reset value
Current no reset value
Current full reset value
Heating reset deg. value
Description
The password required to access User
Configuration menu
Alarm relay status. Alarm output relay is used for
"alarm" + "alert"
Displayed text*
OCCPC01S - Schedule Menu
OCCPC02S - Schedule Menu
Displayed text*
Holiday Start Month
Start Day
Duration (days)
Displayed text*
Activate
Bus
Element
Daylight Savings Select
Month
Day of Week (1=Monday)
Week Number of Month
Month
Day of Week (1=Monday)
Week Number of Month
Description
Unit on/off time schedule
Unit setpoint selection time schedule
Description
Holiday start month
Holiday start day
Holiday duration (days)
Description
Not applicable
Bus number of the unit with the outdoor
temperature sensor
Element number of the unit with outdoor
temperature
Summer/winter time activation (Daylight
saving selection)
Month
Day of the week (1 = Monday)
Week of the month
Month
Day of the week (1 = Monday)
Week of the month